Smile Series Egg Incubator

The S30/52 Smile Series Incubator is designed to make the incubation process simple and efficient. With a capacity of 30 eggs, this incubator features automatic temperature control, ensuring a consistent and optimal environment for hatching. The digital humidity display allows you to monitor and adjust humidity levels accurately, crucial for successful incubation. Operating at 220V, this incubator also rotates the eggs for 10 seconds every 2 hours, mimicking the natural conditions and promoting even development.

Specifications:

• Capacity: 30 eggs
• Automatic Temperature Control: Yes
• Egg Rotation: Rotates for 10 seconds every 2 hours
• Digital Humidity Display: Yes
• Voltage: 220V

Incubation Tips:

1. Choosing Eggs: Select fresh fertilized eggs laid within 4-7 days. Store them at 10-15°C and avoid washing or refrigerating them.
2. Egg Condition: Ensure eggs are clean, without deformities, cracks, or spots.
3. Disinfection: Improper disinfection reduces hatch rates. Ensure eggs are clean if good disinfection is not available.
4. Placement: Place eggs with the pointy side down during incubation.
5. Water Addition: Add water every 1-2 days depending on environmental humidity and the incubator's water content.
6. Manual Turning: Turn eggs manually twice daily, gently and slowly, keeping the pointy side down and swinging left and right at a 45° angle.
7. Egg Testing:
   • 5th-6th Day: Check for fertilization, remove unfertilized, yellow, or dead eggs.
   • 11th-12th Day: Check embryo development, well-developed embryos will have enlarged blood vessels and a sharply demarcated air chamber.
   • 16th-17th Day: Check for well-developed embryos filling the egg, remove any with blurred blood vessels or unclear boundaries.
8. Final Period: Increase humidity and decrease temperature during the last hatching period to prevent dehydration and ensure sufficient water.
9. Temperature Control: Ensure temperature does not exceed 37.5°C from the 19th-21st days.
10. Cover Handling: Avoid frequent cover opening and unplug the machine when the cover is opened.

Operation Instructions:

• Temperature Setting:
  • Press the "Set" button once to light up the indicator.
  • Adjust the temperature using the up or down buttons.
  • Press the "Set" button again to confirm the temperature. The range is 20-39.5°C.
  • To test the egg turning function, press the "Set" button and hold for 3 seconds.
• Indicator Status:
  • The red light on the left side indicates heating; it lights up when the machine is heating.

  • 

    
    

Operation Tips:

1. Power On: Plug into AC220V/AC110V. The left light will turn on, indicating the incubator is working, and the heater will start.
2. Water Addition: Ensure the water tank is full before use.
3. Preheat: Preheat the machine for 15-30 minutes and check the temperature setting at 38°C. Adjust if necessary.
4. Warm-Up Check: Verify both LED indicators are on during warm-up.
5. Egg Placement: Place fertilized eggs into the machine, close the cover, and plug in.

For more information and to purchase the S30/52 Smile Series Incubator, Contact us with the provided button below.